HP High Availability FC Disk Array 30/FC User Guide - Page 305

Event code 0x622 0x623 0x624 0x630 0x631 0x632 0x633 0x634 0x635 0x637 0x638 0x639 0x641 0x643 0x644 0x645 0x646 0x647 Description Background Verify Complete. Disk array has completed background checkpoint verification of the accuracy and completeness of the parity check data in a RAID-5, RAID-3, RAID-1, or RAID-1/0 LUN. Fan Pack Disable/Door Open. Fans disabled because the fan pack door was opened. The disk array shuts down if the fans are not operational within two minutes. Fan Pack Enable/Door Close. Fans were enabled after the fan pack door was closed. Fan Installed. Disk array has detected that a fan has been installed or replaced. VSC Installed. Disk array has detected that a VSC has been installed or replaced. AC Box Installed. An AC Box has been installed. Fan Speed Increased. Disk array has detected an increase in a fan's speed, perhaps because temperature rose or another fan failed. Fan Speed Decreased. The fan speed has returned to normal. Inconsistent Check Information. The SP has detected an inconsistency in the sector based check codes. BBU Recharging. The Battery Backup Unit in this disk array is recharging. BBU Enabled. The Battery Backup Unit in this array has been enabled for use. System Cache Enabled. Storage system cache has become ready. Rebuild Aborted. A background rebuild operation has aborted prior to completing the entire disk. SP Initializing. Peer (second) SP was detected in the chassis. Peer SP Inserted. This SP has been informed by its peer SP that the peer has completed its power up initialization sequence. CRU Bound. Extended status is unit number. This message is logged once for each CRU in a LUN at the completion of a Bind operation. CRU Unbound. Extended status is unit number. This message is logged once for each CRU in a LUN at the completion of an Unbind. Fuse Bad. Extended status is fuse number. This message is logged once at the completion of each powerup for any bad fuse detected by the SP. 8-32