HP High Availability FC Disk Array 30/FC User Guide - Page 309
Event code, Description, Recommended threshold
View all HP High Availability FC Disk Array 30/FC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 309 highlights
Event code 0x805 0x820 0x840 Description Recommended threshold Single Bit Error. The SP's tolerance level for single bit errors in the read cache has been exceeded. Soft Media Error. The SP successfully Notify the user after three cleared a media defect. errors/month/FRU. Disk Sector Invalidated. The LUN that owns this disk encountered a condition which required the firmware to invalidate a sector on the unit. The firmware did this to ensure that incorrect data is not returned to the host in the future. Event code 0x901 0x903 0x904 0x905 0x906 0x907 Description Hard SCSI error. An abnormal SCSI bus or disk drive event was detected and could not be cleared through retry operations. Fan Removed. A fan pack has been shut down or removed from the disk array. VSC Removed. A VSC (power supply) has been shut down or removed from the disk array. Chassis Overtemperature. A chassis overtemperature condition has been detected. The controller attempts corrective action. Unit Shutdown. The Unit of which this drive is a member has been shutdown and can no longer be accessed by the host. Controller Firmware (SP microcode) Panic. A fatal firmware error has occurred; as a result, the program running in the SP has reset SP. The SP was restarted and continued normally. 8-36