HP Indigo 7000 Users Guide - Page 90

3. Remove the substrate sheet that is jammed between the cleaning station and the PIP drum. 4. Reinstall the cleaning station, and cleaning station blade. 5. Close all doors and release the Emergency Stop button. Removing substrate shreds under the PTE, exit roller and exit blanket ventilation Remove substrate shreds from the press when a sheet is torn during a substrate jam. If you suspect that the whole sheet has not been removed after a substrate jam, check the space between the air knife and the PIP: 1. Press an Emergency Stop button and open the front door. 2. Remove the PTE unit. 3. Remove the exit roller and exit blanket ventilation unit. 4. Access the PIP and remove any loose substrate shreds. 5. Re-install the PTE unit, exit roller, and exit blanket ventilation unit. 6. Close all doors and release the Emergency Stop button. Removing substrate jam at the exit conveyor WARNING! Press an Emergency Stop button before you try to fix a substrate jam. To clear a substrate jam at the exit conveyor: 1. Open the press exit sliding window and lift up the exit cover. 2. Carefully remove jammed substrate. ENWW Clearing substrate jams 81