HP Integrity BL860c Errata: HP OpenVMS Support - HP Integrity BL860c Server Bl
HP Integrity BL860c Manual
 |
View all HP Integrity BL860c manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Integrity BL860c manual content summary:
- HP Integrity BL860c | Errata: HP OpenVMS Support - HP Integrity BL860c Server Bl - Page 1
for HP OpenVMS Support of HP Integrity BL860c Server Blade Required Patches and Installation Steps for HP OpenVMS Version 8.3 on the HP Integrity BL860c Server Blade Introduction This document identifies important information that is required for HP OpenVMS support on the HP Integrity BL860c Server - HP Integrity BL860c | Errata: HP OpenVMS Support - HP Integrity BL860c Server Bl - Page 2
Integrity BL860c Server Blade. The OpenVMS Version 8.3 support for the HP Integrity BL860c Server Blade was tested with the following firmware versions. The following table lists the recommended firmware: System BL860c System Firmware 01.01 BMC MP PDH UCIO Firmware Firmware Firmware Firmware - HP Integrity BL860c | Errata: HP OpenVMS Support - HP Integrity BL860c Server Bl - Page 3
listed patch kits must be installed as instructed in the following section. • HP OpenVMS Version 8.3 Upgrade and Installation Manual, part number BA322-90045 and available at the following Web site: Installing OpenVMS on Your Integrity BL860c Server Blade 1. Download the required patch kits (listed - HP Integrity BL860c | Errata: HP OpenVMS Support - HP Integrity BL860c Server Bl - Page 4
drive). 4. Enable the InfoServer utility on the boot server and create a service for the spare disk device, following the instructions provided in Section C.3 of the OpenVMS Upgrade and Installation Manual and observing the options provided in the following note. HP Part No. 5992-0787 4 June 2007 - HP Integrity BL860c | Errata: HP OpenVMS Support - HP Integrity BL860c Server Bl - Page 5
an InfoServer just while installing OpenVMS on a Server Blade, you can use the following commands to accomplish servers as instructed in Section C.4 of the OpenVMS Upgrade and Installation Manual. NOTE: Verify that the BOOTP and TFTP servers are configured and started by using the HP TCP/IP Services - HP Integrity BL860c | Errata: HP OpenVMS Support - HP Integrity BL860c Server Bl - Page 6
6. Access EFI on your Integrity BL860c Server Blade and select the boot option associated with the InfoServer service (I64083B) created in step 4. For instructions on booting from the InfoServer, see Section C.5 of the OpenVMS Upgrade and Installation Manual. NOTE: If you have not previously added - HP Integrity BL860c | Errata: HP OpenVMS Support - HP Integrity BL860c Server Bl - Page 7
/NOWRITE LDA1: I64083B $ INFOSERVER :== $ESS$INFOSERVER $ INFOSERVER INFOSERVER> CREATE SERVICE I64083B LDA1: INFOSERVER> EXIT After entering these commands, continue with steps 5 through 7. If you plan to install OpenVMS on additional Server Blades, you can use the InfoServer SAVE command to create
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
HP Part No.
5992-0787
1
June 2007
Errata Sheet for HP OpenVMS Support of
HP Integrity BL860c Server Blade
Required Patches and Installation Steps for HP OpenVMS Version 8.3
on the HP Integrity BL860c Server Blade
Introduction
This document identifies important information that is required for HP OpenVMS support on the HP Integrity
BL860c Server Blade. Read this document before booting your system.
OpenVMS Version 8.3 plus the patch kits listed in the next section provide support for the following features:
Server Blade System (all processor speeds)
C7000 enclosure and HP Onboard Administrator
Three PCI-e mezzanine I/O slots plus core I/O
HP intends to introduce other features (such as provisioning, WBEM providers, USB DVD, and vMedia) as part
of the next version of OpenVMS.
Required Patches for OpenVMS
You must install HP OpenVMS Version 8.3 before installing any of the patches.
The following patches or later are needed for OpenVMS support of the BL860c Server Blade.
Read the release notes supplied with each patch kit on installation.
VMS83I_UPDATE-V0200 or later
VMS83I_SYS-V0200 or later
VMS83I_LMF-V0200 or later
VMS83I_FIBRE_SCSI-V0400 or later
VMS83I_LAN-V0500 or later
VMS83I_BLADE_V0100 or later
Refer to the following website to download the current patches.