HP Integrity BLc3000 HP 10GbE Pass-Thru Module User Guide - Page 11
Accessing the pass-thru module CLI locally, Production mode CLI, CLI menu
View all HP Integrity BLc3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Accessing the pass-thru module CLI locally 1. Using a null-modem mini-USB to DB-9 RS232 serial cable (not included), connect the pass-thru module management port to a local client device (such as a laptop computer). 2. Open a terminal emulation session and set the following parameters: Parameter Baud rate Data bits Parity Stop bits Flow control Value 9600 8 None 1 None Production mode CLI The CLI provides backward and forward cursor control, backward deletion capability, and a 16-line history buffer. There is no tab "auto-completion" feature, but if there is enough information to determine the command to be used, the interface will accept part of the CLI command. For example, entering sys is enough to enter the system menu. CLI menu Command Main menu system port System menu info config dumpconfig reset Port menu auto info Global command save Result Displays System menu. Displays Port menu. Displays system information. Enables you to set active or factory default configuration. Dumps active configuration. Resets pass-thru module. Displays Port menu auto-negotiation configuration details. Displays port information. Saves configuration. Notes: • The port/auto command uses the following format: "/port/auto ". The port number can be a sequence of numbers (e.g., "1 3 5 15") or, if all ports are to be configured, the "*" option can be used (for example, "/port/auto uplink * off" disables autonegotiation on all uplink ports). • The port/info command displays link configuration and status. Installing the pass-thru module 11