HP Integrity BLc3000 HP 10GbE Pass-Thru Module User Guide - Page 9

Installing the pass-thru module

Page 9 highlights

Installing the pass-thru module Manually configuring the pass-thru module Configure the pass-thru module manually using a CLI. See "Accessing the pass-thru module ("Accessing the pass-thru module CLI" on page 10)" for more information. Module security The 10GbE Pass-Thru Module does not provide network security. You must provide security for the module from somewhere else on the network. Installing the module CAUTION: Do not attach the pass-thru module cables until after configuration. IMPORTANT: Make sure that the server NIC configuration matches the pass-thru module bay selected. 1. If a blank is installed in the bay, open the handle (1) and pull the blank out of the bay (2). 2. Open the handle on the pass-thru module. 3. Insert the pass-thru module into the bay (1). Installing the pass-thru module 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

Installing the pass-thru module
9
Installing the pass-thru module
Manually configuring the pass-thru module
Configure the pass-thru module manually using a CLI. See "Accessing the pass-thru module ("
Accessing
the pass-thru module CLI
" on page
10
)" for more information.
Module security
The 10GbE Pass-Thru Module does not provide network security. You must provide security for the module
from somewhere else on the network.
Installing the module
CAUTION:
Do not attach the pass-thru module cables until after configuration.
IMPORTANT:
Make sure that the server NIC configuration matches the pass-thru module bay
selected.
1.
If a blank is installed in the bay, open the handle (1) and pull the blank out of the bay (2).
2.
Open the handle on the pass-thru module.
3.
Insert the pass-thru module into the bay (1).