HP Integrity Superdome 2 HP Integrity Superdome 2 Site Preparation Guide (AH33 - Page 33
Environmental specifications, Temperature and humidity specifications - site preparation guide
View all HP Integrity Superdome 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Table 2-10 IOX ac power specifications (continued) Requirements Power factor correction Ground leakage current Value 0.97 1 mA Table 2-11 IOX enclosure power requirements Power Required (50-60 Hz) User Expected Maximum Power1 Watts VA 525 535 1 Typical maximum power: or User expected maximum power, (Input power at the ac input expressed in Watts and Volt-Amps.) This figure is developed with the absolute maximum configuration running applications designed to draw the maximum power possible. It is highly unlikely that any real-world application will result in this amount of power use for any significant time period. For more information about general site preparation guidelines, see the Generic Site Preparation Guide. Environmental specifications Temperature and humidity specifications The following table contains the allowed and recommended temperature and humidity limits for both operating and non-operating Superdome 2 systems. Specification Temperature range1 Value Operating (allowable) Operating (recommended)2 15°C to 32°C (59°F to 89.6°F) 20°C to 25°C (68°F to 77°F) Non-operating (powered off) 5°C to 45°C (41°F to 113°F) Non-operating (storage) Relative humidity (noncondensing)3 -40°C to 70°C (-40°F to 158°F) Operating (allowable) Operating (recommended)2 20% to 80% 40% to 55% Non-operating 8% to 80% 1 All temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m above 900 m is applicable. No direct sunlight allowed. Upper operating limit is 3,048 m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or 30.3 KPa/4.4 psia. 2 Recommended target facility design and operational range. 3 Storage maximum humidity of 90% is based on a maximum temperature of 45°C (113°F). Altitude maximum for storage corresponds to a pressure minimum of 70 KPa. For more information about general site preparation guidelines, see the Generic Site Preparation Guide. Environmental specifications 33