HP Integrity Superdome SX2000 HP Insight Manager WBEM Provider Events Referenc - Page 102
HP Support Representative to investigate the fabric. WBEM EventID: 6775. WBEM
View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Event ID Event Severity 12227 Error 12228 Warning 12229 Warning 12230 Warning 12231 Warning 12232 Warning 12244 Error 12251 Error 12255 Error 12289 Warning Event Description The online diagnostics have identified a hardware problem. Probable Cause: OS based diagnostics discovered a hardware problem. Recommended Action: Consult the OS diagnostics logs for details about the problem. WBEM EventID: 6779. WBEM ProviderName: FPL_IndicationProvider. Over-Temperature or power condition detected for processor. Probable Cause: The processor temperature or power has exceeded normal limits. The Enhanced Thermal Management (ETM) feature of the processor has been employed to reduce the chip power to allow operation within normal limits. If this condition persists, this will have an adverse impact on the performance of this processor. Recommended Action: Check that there are no issues with the cooling, and if the problem persists contact HP service. WBEM EventID: 6836. WBEM ProviderName: FPL_IndicationProvider. An error occurred while checking the fabricless boot state. Probable Cause: System firmware was unable to access the fabric graph or the expected vertex was not found Recommended Action: This is a symptom of a problem, not the cause. Look for additional IPMI event logs that more accurately describe the problem. Contact your HP Support Representative to investigate the fabric. WBEM EventID: 6775. WBEM ProviderName: FPL_IndicationProvider. System firmware was unable to clear the link error masks. Probable Cause: This event does not indicate the original cause. This is a problem encountered while handling a fabric link error. Recommended Action: Collect IPMI event logs to determine the original cause of the error. Contact your HP Support Representative to troubleshoot the fabric. WBEM EventID: 6776. WBEM ProviderName: FPL_IndicationProvider. System firmware could not determine a link's address. Probable Cause: This event does not indicate the original cause. This is a problem encountered while handling a fabric link error. Recommended Action: Collect IPMI event logs to determine the original cause of the error. Contact your HP Support Representative to troubleshoot the fabric. WBEM EventID: 6777. WBEM ProviderName: FPL_IndicationProvider. System firmware was unable to turn a bad link off. Probable Cause: This event does not indicate the original cause. This is a problem encountered while handling a fabric link error. Recommended Action: Collect IPMI event logs to determine the original cause of the error. Contact your HP Support Representative to troubleshoot the fabric. WBEM EventID: 6778. WBEM ProviderName: FPL_IndicationProvider. The windows watchdog timer has expired. The partition associated with the cell with the expired timer will be reset. Probable Cause: Windows had configured the Windows watchdog timer to either reset or power off the nPartition on a timeout and the Windows watchdog timer has expired without being refreshed. The nPartition will either be reset or powered off. Recommended Action: Investigate the operating system, drivers, Windows applications and event logs for possible causes. If hardware is suspected, contact HP customer support. WBEM EventID: 6867. WBEM ProviderName: FPL_IndicationProvider. An entity's MP Bus communications controller is reporting a hardware revision that is known to cause MP Bus communications failures. Probable Cause: An entity's MP Bus communications controller is reporting a hardware revision that is known to cause MP Bus communications failures. Recommended Action: Contact your HP Service Representative to investigate the failing hardware. WBEM EventID: 6875. WBEM ProviderName: FPL_IndicationProvider. 12v power to a PCI slot located on the IO Chassis has power faulted. Probable Cause: Main power at the PCI slot located on the IO Chassis has faulted. Recommended Action: contact HP support. WBEM EventID: 6877. WBEM ProviderName: FPL_IndicationProvider. SFW detected a failure while optimizing the fabric. Probable Cause: Failure detected by SFW while the optimizing fabric. Recommended Action: Collect IPMI events and contact your HP Support Representative for assistance. WBEM EventID: 6888. WBEM ProviderName: FPL_IndicationProvider. 102 WBEM Provider Event Tables