HP Integrity rx7620 Installation Guide, Seventh Edition - HP Integrity rx7620 - Page 80
Front Panel Display, Standby Power, Present, Attention
![]() |
View all HP Integrity rx7620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Cable Connections MP Core I/O Connections On the front of the HP Integrity rx7620 Server, a solid green Standby Power LED, a solid green MP Present LED, and a flashing amber Attention LED will illuminate after about 30 seconds. Figure 4-7 Front Panel Display 2. Check the bulk power supply LED for each BPS. When on, the breakers distribute power to the BPSs. AC power is present at the BPSs: • When power is first applied. The BPS LEDs will be flashing amber. • After 30 seconds has elapsed. The flashing amber BPS LED for each BPS becomes a flashing green LED. Refer to power cord policies to interpret LED indicators. 3. Log in to the MP: a. Enter Admin at the login prompt. The login is case sensitive. It takes a few moments for the MP prompt to display. If it does not, be sure the laptop serial device settings are correct: 8 bits, no parity, 9600 baud, and na for both Receive and Transmit. Then, try again. b. Enter Admin at the password prompt. The password is case sensitive. 80 Chapter 4
![](/manual_guide/products/hewlettpackard-integrity-rx7620-installation-guide-edition-hp-integrity-rx7620-servers-aee7fc4/80.png)