HP Integrity rx7620 Installation Guide, Seventh Edition - HP Integrity rx7620 - Page 82
The lc Command Screen, Enter the MP Network name.
![]() |
View all HP Integrity rx7620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Cable Connections MP Core I/O Connections Enter lc and press the Return key. The following screen is displayed: Figure 4-9 The lc Command Screen NOTE The value in the "IP address" field has been set at the factory. Obtain the actual LAN IP address from the customer. 2. At the prompt, Do you want to modify the configuration for the customer LAN?, enter y. The current IP address is shown; and the following prompt displays: Do you want to modify it? (Y/[N]) 3. Enter y. 4. Enter the new IP address. The customer must provide this address for network interface 0. 5. Confirm the new address. 6. Enter the MP Network name. This is the host name for the customer LAN. The name can be as many as 64 characters in length, and include alphanumeric characters, - (dash), _ (under bar),. (period), or a space. HP recommends that the name be a derivative of the complex name. For example, Acme.com_MP. 7. Enter the LAN parameters for the Subnet mask and Gateway address fields. This information must come from the customer. 8. The system indicates the parameters have been updated and returns to the MP Command Menu prompt (MP:CM>). 9. Enter the ls command at the MP Command Menu prompt (MP:CM>) to check the LAN parameters and status. 82 Chapter 4
![](/manual_guide/products/hewlettpackard-integrity-rx7620-installation-guide-edition-hp-integrity-rx7620-servers-aee7fc4/82.png)