HP Jetdirect 200m HP Jetdirect 200m Print Server - (English) Administrator Gui - Page 119

Table 4.3 Item 802.11B Configuration Parameters (7 of 7) Description Dynamic For dynamic encryption, you may select one of the following options: Basic Encryption: Dynamic WEP encryption is supported. Robust Encryption: Dynamic Wi-Fi Protected Access (WPA) and WEP encryption protocols are supported. When configured for EAP/PSK authentication, the print server uses Robust Encryption (WPA encryption protocols). When configured for EAP/802.1x authentication (LEAP only), the print server should be configured with Basic Encryption. When configured for EAP/802.1x authentication (PEAP, TLS, TTLS only), the print server may be configured with either Basic Encryption or Robust Encryption depending on your network. Dynamic encryption protocols are under the control of the authentication server and also must be supported by the Access Point. TCP/IP The TCP/IP page provides configuration parameters summarized in Table 4.4. Table 4.4 Item TCP/IP Settings (1 of 4) Description IP Configuration Method Selects the method that the HP Jetdirect print server will use for its IP configuration parameters: BOOTP (default), DHCP, Manual, or Auto IP. For BOOTP or DHCP, the IP parameters will be automatically configured by a BOOTP or DHCP server each time the print server is powered on. If you select Manual, then basic IP parameters can be manually entered using this Web page, or using other available tools. If you select Auto IP, then a unique link-local address 169.254.x.x will be assigned. For more information, see Chapter 3. ENWW Using the Embedded Web Server 119