HP Jetdirect 200m HP Jetdirect 200m Print Server - (English) Administrator Gui - Page 147
Using the Embedded Web Server 147, Export Certificate and Private Key
View all HP Jetdirect 200m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Table 4.12 Certificate Configuration Screens (2 of 3) Export Certificate and Private Key. This option allows you to export the Jetdirect certificate currently installed on the print server for use on other print servers. Using this option, you are prompted by the following screen: Export the Jetdirect certificate and private key. Delete CA Certificate. (Wireless print servers only) This option is used to remove the CA certificate installed on the Jetdirect print server. This option appears when a CA certificate for EAP authentication has been installed. CAUTION: If the CA Certificate is deleted, EAP authentication will be disabled and network access will be denied. The CA Certificate will also be removed on a cold-reset of the print server, where factory-default settings are restored. Certificate Validity Use this screen to specify how long the Jetdirect self-signed certificate will be valid. This screen appears only when a self-signed certificate is preinstalled and you click Edit Settings to update the validity period. It specifies the current Coordinated Universal Time (UTC). UTC is a time scale maintained by the International Bureau of Weights and Measures. It adjusts for differences between Greenwich Mean Time and atomic time. It is set at 0 degrees longitude on the prime meridian. The Validity Start Date is calculated from the PC's clock settings. The Validity Period specifies the number of days (1 to 3650) that the certificate is valid, starting from the Validity Start Date. A valid entry (1 to 3650) is required. The default is 5 years. Certificate Information Use this page to enter information for requesting a certificate from a Certificate Authority. Common Name. (Required) For HP Jetdirect print servers, specify the fully qualified domain name or a valid IP address for the device. Examples: Domain Name: myprinter.mydepartment.mycompany.com IP address: 192.168.2.116 The Common Name will be used to uniquely identify the device. For HP Jetdirect wireless print servers using EAP authentication, some authentication servers may need to be configured with the Common Name as specified on the certificate. If the default IP address 192.0.0.192 is configured on the Jetdirect print server, it will not likely be valid for your network. You should not use this default address to identify your device. Organization. (Required) Specify the full legal name for your company. ENWW Using the Embedded Web Server 147