Home » HP Manuals » Printers » HP Jetdirect 640n » Manual Viewer

HP Jetdirect 640n HP Jetdirect Print Servers 640n and 695n - Administrator's G - Page 110

X Authentication

Add to My Manuals
Save this manual to your list of manuals

Page 110 highlights

Table 4-17 Other protocols (continued) Item Description Enable Device Discovery Select device discovery protocols supported by the print server: SLP If enabled, the HP Jetdirect print server sends SLP packets, which are used by system applications for automated discovery and installation. If disabled, SLP packets are not sent. If SLP uses multicast protocols, you must enable multicast IPv4. Bonjour If enabled, Bonjour services are provided. Bonjour is typically used on for IP address and name resolution (through UDP port 5353) where a conventional DNS server is not used. For Bonjour operation, you must enable multicast IPv4. Multicast IPv4 If enabled, the print server sends and receives IP version 4 multicast packets. If disabled, other protocols that use multicast protocols (such as Bonjour and SLP), might be disabled without notification. WS-Discovery Microsoft Web Services Dynamic Discovery (WS Discovery) protocols on the print server. Naming Resolution Indicates whether link local multicast name resolution (LLMNR) requests are responded to over IPv4 and IPv6. Enable Management Protocols Select the management protocols to use: Telnet, FTP Firmware Update, or RCFG. Telnet and FTP are not secure protocols and device passwords can be intercepted. RCFG, a remote IPX configuration protocol used by older management tools to configure Novell NetWare parameters. Disabling RCFG does not affect direct mode printing using IPX/SPX. It is recommended that you disable Telnet, FTP firmware upgrades, and RCFG. 802.1X Authentication (Full-featured print servers only) Use this item to configure 802.1X authentication settings on the HP Jetdirect print server as required for client authentication on your network. You can also reset the 802.1X authentication settings to factory default values. CAUTION: If you change the 802.1X authentication settings, you can lose your connection. If communication with the printer/MFP device is lost, you might need to reset the print server to a factory default state and then reinstall the device. For most 802.1X networks, the infrastructure components (such as LAN switches) must use 802.1X protocols to control a port's access to the network. If these ports do not allow partial or guest access, you might need to configure the print server with your 802.1X parameters prior to connection. To configure initial 802.1X settings before connecting to your network, use an isolated LAN, or a direct computer connection using a cross-over cable. 100 Chapter 4 HP Embedded Web Server (V.45.xx.nn.xx) ENWW

Section	Page
Introducing the HP Jetdirect print server	11
Supported print servers	11
Supported network protocols	12
Security protocols	13
SNMP (IP and IPX)	13
HTTPS	13
Authentication	13
EAP/802.1X port-based authentication	13
IPsec/Firewall	14
Supplied manuals	14
HP support	15
HP online support	15
Firmware upgrades	15
Firmware installation tools	15
HP support by phone	15
Product registration	16
Product accessibility	16
HP software solutions summary	17
HP Install Network Printer Wizard (Microsoft Windows)	18
Requirements	19
HP Jetdirect Printer Installer for UNIX	19
HP Web Jetadmin	19
System requirements	19
Install HP Web Jetadmin software	20
Verify HP Web Jetadmin installation and provide access	20
Configure and modify a device	20
Remove HP Web Jetadmin software	20
Internet Printer Connection software	20
Microsoft-supplied software	21
Microsoft Windows XP/Windows Server 2003 or 2008 integrated software	21
Novell-supplied software	22
Mac OS network installation	22
TCP/IP configuration	25
IPv6 configuration	25
IPv6 address introduction	25
IPv6 address configuration	26
Link-local address	26
Stateless addresses	27
Stateful addresses	27
Use DNS	27
Tools and utilities	28
IPv4 configuration	28
Server-based and manual TCP/IP configuration (IPv4)	28
Default IP address (IPv4)	29
Default IP address is not assigned	29
Default IP address is assigned	29
Default IPv4 address configuration options	30
Default IPv4 behavior	31
TCP/IP configuration tools	31
Use BOOTP/TFTP (IPv4)	32
Advantages of using BOOTP/TFTP	32
Configure the print server using BOOTP/TFTP on UNIX	32
Use DHCP (IPv4)	46
UNIX systems	46
Microsoft Windows systems	47
Discontinue DHCP configuration	47
Use RARP (IPv4)	47
Use the arp and ping commands (IPv4)	48
Use Telnet (IPv4)	49
Create a Telnet connection	50
A typical Telnet session	50
Telnet user interface options	51
Use Telnet to remove an IP address	70
Move to another network (IPv4)	71
Use the HP Embedded Web Server	71
Use the printer control panel	71
HP Embedded Web Server (V.45.xx.nn.xx)	73
Requirements	74
Compatible Web browsers	74
Supported HP Web Jetadmin version	74
View the HP Embedded Web Server	74
Operating notes	76
HP Jetdirect Home tab	76
Device tabs	77
Networking tab	77
TCP/IP Settings	84
Summary tab	84
Network Identification tab	85
TCP/IP(v4) tab	86
TCP/IP(v6) tab	87
Config Precedence tab	88
Advanced tab	89
Network Settings	91
IPX/SPX	91
AppleTalk	92
DLC/LLC	93
SNMP	93
Other Settings	95
Misc. Settings	95
Firmware Upgrade	97
LPD Queues	97
Support Info	100
Refresh Rate	100
Select Language	100
Security: Settings	100
Status	100
Wizard	100
Restore Defaults	102
Authorization	103
Admin. Account	103
Certificates	103
Configure certificates	104
Access Control	107
Mgmt. Protocols	108
Web Mgmt.	108
SNMP	108
SNMP v3	108
Other	109
802.1X Authentication	110
IPsec/Firewall	112
Device Announcement Agent	112
Network Statistics	113
Protocol Info	113
Configuration Page	113
Other Links	113
? (Help)	113
Support	113
IPsec/Firewall configuration (V.45.xx.nn.xx)	115
Default Rule example	118
IPsec security associations (SA)	118
HP Jetdirect IPsec/Firewall wizard	118
Limitations to rules, templates and services	119
Step 1: Specify Address Template	120
Create Address Template	120
Step 2: Specify Service Template	121
Create Service Template	121
Manage Services	122
Manage Custom Services	122
Step 3: Specify Action	123
Specify IPsec/Firewall Template	123
Create IPsec Template	124
Identity Authentication	124
Kerberos	125
Kerberos Settings	126
IKEv1/IKEv2 Phase 1 (Authentication)	127
IKEv1/IKEv2 Phase 2 / Quick Mode (IPsec Protocols)	127
Advanced IKE Settings	128
IPsec Protocols (Manual Keys)	128
Manual Keys	129
Rule Summary	130
Configure Microsoft Windows systems	130
Security features (V.45.xx.nn.xx)	131
Limit access to security features	134
Troubleshoot the HP Jetdirect print server	135
Reset to factory defaults	136
Example: Cold reset using the service menu	136
Disable an HP Jetdirect embedded print server (V.45.xx.nn.xx)	138
General troubleshooting	139
Troubleshooting chart - assess the problem	139
Procedure 1: Verify the printer is on and online	140
Procedure 2: Print an HP Jetdirect configuration page	140
Procedure 3: Resolve printer display error messages	141
Procedure 4: Resolve printer network communication problems	142
Troubleshooting wireless print servers	145
HP Jetdirect configuration pages	149
HP Jetdirect configuration page	150
Status field error messages	150
Configuration page format	150
Configuration page messages	151
HP Jetdirect Configuration/General Information	151
Security Settings	154
Network Statistics	156
TCP/IP protocol information	157
IPv4 section	157
IPv6 section	159
IPX/SPX protocol information	160
Novell/NetWare parameters	161
AppleTalk protocol information	161
DLC/LLC protocol information	162
Error messages	162
HP Jetdirect Security page	169
Security settings	170
IPsec Error Log	172
Local IP addresses	172
IPsec Statistics	172
IKE Stats	173
IPsec Rules	173
IPsec Security Associations (SA) table	174
Available Network Services	174
LPD printing	175
About LPD	176
Requirements for configuring LPD	176
LPD setup overview	177
Step 1. Set up IP parameters	177
Step 2. Set up print queues	177
Step 3. Print a test file	177
LPD on UNIX systems	178
Configure print queues for BSD-based systems	178
Use SAM to configure print queues (HP-UX systems)	179
Print a test file	180
LPD on Microsoft Windows Server 2003/2008 systems	180
Install TCP/IP software	181
Configure a network printer for Microsoft Windows Server 2003/2008 systems	181
Verify the configuration	182
Print from Microsoft Windows clients	183
LPD on Microsoft Windows XP systems	183
Add Microsoft Windows optional networking components	183
Configure a network LPD printer	183
Add a new LPD printer	183
Create an LPR port for an installed printer	184
FTP printing	185
Requirements	185
Print files	185
Use FTP printing	185
FTP connections	185
Control connection	185
Data connection	186
FTP login	186
End the FTP session	187
Commands	187
Example FTP Session	188
HP Jetdirect control panel menus (V.45.xx.nn.xx)	189
Graphical control panel menus	190
Classic control panel EIO menus	199
Open source licensing statements	203
gSOAP	203
Expat XML Parser	204
cURL	205
GNU General Public License	206
GNU Lesser General Public License	211
OpenSSL	218
OpenSSL license	218
Original SSLeay license	218

Match case Limit results 1 per page

Table 4-17

Other protocols (continued)

Item

Description

Enable Device Discovery

Select device discovery protocols supported by the print server:

SLP

If enabled, the HP Jetdirect print server sends SLP packets, which are used by system

applications for automated discovery and installation.

If disabled, SLP packets are not sent.

If SLP uses multicast protocols, you must enable multicast IPv4.

Bonjour

If enabled, Bonjour services are provided. Bonjour is typically used on for IP address

and name resolution (through UDP port 5353) where a conventional DNS server is not

used.

For Bonjour operation, you must enable multicast IPv4.

Multicast IPv4

If enabled, the print server sends and receives IP version 4 multicast packets.

disabled, other protocols that use multicast protocols (such as Bonjour and SLP),

might be disabled without notification.

WS-Discovery

Microsoft Web Services Dynamic Discovery (WS Discovery) protocols

on the print server.

Naming Resolution

Indicates whether link local multicast name resolution (LLMNR) requests are responded

to over IPv4 and IPv6.

Enable Management Protocols

Select the management protocols to use:

Telnet

FTP Firmware Update

, or

RCFG

Telnet and FTP are not secure protocols and device passwords can be intercepted.

RCFG, a remote IPX configuration protocol used by older management tools to

configure Novell NetWare parameters. Disabling RCFG does not affect direct mode

printing using IPX/SPX.

It is recommended that you disable Telnet, FTP firmware upgrades, and RCFG.

802.1X Authentication

(Full-featured print servers only) Use this item to configure 802.1X authentication settings on the

HP Jetdirect print server as required for client authentication on your network. You can also reset the

802.1X authentication settings to factory default values.

CAUTION:

If you change the 802.1X authentication settings, you can lose your connection

. If

communication with the printer/MFP device is lost, you might need to reset the print server to a

factory default state and then reinstall the device.

For most 802.1X networks, the infrastructure components (such as LAN switches) must use 802.1X

protocols to control a port's access to the network. If these ports do not allow partial or guest access,

you might need to configure the print server with your 802.1X parameters prior to connection.

To configure initial 802.1X settings before connecting to your network, use an isolated LAN, or a

direct computer connection using a cross-over cable.

100

Chapter 4

HP Embedded Web Server (V.45.xx.nn.xx)

ENWW