HP Kayak XW A2-U2-W2 HP Kayak XW (Series A2-U2-W2), Service Handbook chapter - Page 21
Beep Codes for the HP Kayak XM600, Beep, POST, and Error Codes, Pattern, Numeric, Description
View all HP Kayak XW A2-U2-W2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
A Beep Codes for the HP Kayak XM600 Beep Pattern - -- -- --- Beep Code 1-2-2-3 - --- - - 1-3-1-1 1-3-1-3 - --- ---- 1-3-3-1 1-3-4-1 1-3-4-3 1-4-1-1 -- - -- --- 2-1-2-3 2-2-3-1 - -- 1-2 Numeric Code 16h 20h Description BIOS ROM check-sum failure DRAM refresh test failure1 22h 8042 Keyboard controller test failure 28h Initialization of RDRAM has failed. 2Ch RAM failure on address line1.... 2Eh RAM failure on data bits ....of low byte of memory bus1 30h RAM failure on data bits ....of high byte of memory bus1 46h ROM copyright notice check failure 58h Unexpected interrupts test failure 98h Video configuration failure or option ROMs check-sum failure Recommended Action Inform HP support/HP reseller that system board is defective. Check the memory is correctly installed. If the error still occurs, replace the module. Inform HP support/HP reseller that system board is defective. Verify that memory or continuity modules are installed. Check the memory is correctly installed. If the error still occurs, replace the module. Check the memory is correctly installed. If the error still occurs, replace the module. Check the memory is correctly installed. If the error still occurs, replace the module. Inform HP support/HP reseller that system board is defective. Inform HP support/HP reseller that system board is defective. This can be caused by problems with the ROM on integrated video, an add-on video board or the ROM on a SCSI card. Inform reseller for the affected component. 1. Non-HP memory modules are not supported. Only HP memory modules should be used. A-4 Beep, POST, and Error Codes