HP LH4r HP Netserver LH 4 Installation Road Map - Page 1
HP LH4r - NetServer - 256 MB RAM Manual
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
5967-5281 Printed on recycled paper. Printed in November 1998 Hewlett-Packard Company Network Server Division Technical Communications/MS 45S-LE 10955 Tantau Avenue Cupertino, CA 95014 USA © Copyright 1998, Hewlett-Packard Company Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett-Packard. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. HP NetServer ILRnoHsta4adllaMtiaopn NetServer LH 4 Installation Road Map 1. Verify Contents 2. Overview of NetServer Features 3. Obtain HP NetServer Navigator CD-ROM Release History 4. Connect Monitor, Keyboard, and Mouse 5. Preparation 6. Removing and Replacing the Covers 7. Install All Accessory Boards 8. Install Additional Memory 9. Install Additional Mass Storage Devices 10. Replace Covers and Cables 11. Verify Installed Accessories (Optional) 12. Configure the HP NetServer Audience Assumptions This road map is intended for the person who installs, administers, and troubleshoots LAN servers. Hewlett-Packard Company assumes that you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels. ESD Warning This HP NetServer contains sensitive electronic devices that can be damaged by electrostatic discharge (ESD). ESD hazards are a result of installation or service personnel failing to ground themselves properly. To be properly grounded, use a proper ESD wrist strap and work surface grounded to the HP NetServer chassis. Tools Required Installation of some accessories require a T25 TORX® and T15 TORX® or a 1/4-inch flat blade screwdriver, depending on the accessory. 1 Verify Contents Unpack and verify the contents of the shipping box against the Contents Checklist included with your HP NetServer. If anything is missing or damaged, contact your reseller.