HP LH4r HP Netserver LH 4 Rack Storage/12FC Installation Guide - Page 6
Storage - netserver lh4
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
SPU Model Clock speed No. of CPUs BIOS version CPU cache RAM No. of power supplies Local storage I/O slots: Storage HP NetServer LH4 400, 450, 500, 550 MHz. or higher 2 - 4 4.06.22 PS or later Any size 256 MB minimum. Must be HP. 3 required, 4 for redundancy See Local Storage below. P1 - Host Bus Adapter P2 - HP TopTools Remote Control card D6028A (optional) P3 - Client LAN P4 - Intra-cluster (Heartbeat) LANs Local Controller Cabinets (Physical drive location) Disk drives (hot swap or fixed) SCSI bus SCSI Ids May Use - Embedded RAID, NetRAID-3Si, or any manufacturer or driver in any available I/O slot May Not Use - NetRAID-1 or NetRAID-3 SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/12), any number. Must be HP. Any HP cables that meet SCSI specifications and any SCSI bus speed. Any Shared HP Rack Storage/12FC Host Bus Adapter Model No. of HBAs Driver SPU I/O slot RAID level Cabinet RAID arrays No. of cabinets FC Array Cards Model No. of cards/cabinet Firmware Status SCSI ID Disk SCSI IDs Disk drives: (Required) HP D8602A 1 1.12 or later P1 0, 1, 3, 5, or 0 & 1 Not more than 8 physical drives per logical array and not more than 8 LUNs are permitted per Rack Storage/12FC and Rack Storage/12 combination in a cluster. 1 D5990A 1 - Simplex (Supplied with Rack Storage/12FC.) 2 - Duplex (Additional card required in the Rack Storage/12FC.) 4.64-00 or later 5 (fixed) 0 - 3, 8 - 15 (fixed) HP 9.1 GB Ultra SCSI Disk Module D6106A 2