HP LH4r HP Netserver LXr Pro8 - Page 5

1 Overview About This Guide This guide describes the installation of the 200 MHz/1 MB Processor Board Accessory Kit in HP NetServer LXr Pro8 systems. The processor board includes two 200 MHz/1 MB CPU chips, on which two heat pipes are mounted for efficient cooling. Use this guide to install up to three additional processor boards in a system that already has one 200 MHz/1MB processor board installed. In addition to the installation instructions, this guide contains regulatory information. Additional Information For other information about your HP NetServer LXr Pro8, refer to the HP NetServer LXr Pro8 User Guide. Verify Contents CAUTION Do not remove the processor board from its bag until you are ready to install it. Make sure the bag remains sealed. The CPU chips are sensitive to humidity, so desiccant has been packed in the bag containing the processor board. When the processor board has been installed and the HP NetServer is running, the chips are no longer sensitive to humidity. Unpack the shipping box and verify that you received the contents listed on the next page for the 200 MHz/1 MB Processor Board Accessory Kit. If anything is missing or damaged, or if the bag around the processor board is not sealed, call your reseller. 1