HP LH4r HP Netserver LXr Pro8 Memory Board - Page 23
Installing the 4 GB Memory Board
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 2 Installing Memory in the 4 GB Memory Board 7. Place the DIMM in its anti-static container. 8. Repeat steps 5-7 for as many SDRAM DIMMs as you need to remove. 9. If necessary, remove SDRAM DIMMs and reinstall in new slots to match the DIMM slot configuration for the downsized memory. (See Figure 2-2.) CAUTION Close all retaining clips on the 4 GB memory board before inserting it into your NetServer. This includes clips on empty slots as well as those on slots containing DIMMs. This facilitates insertion of the memory board. 10. Install the memory board in the satellite chassis (See the section entitled Installing the 4 GB Memory Board). Installing the 4 GB Memory Board Once you have installed the SDRAM DIMMs required for your desired configuration, do the following. 1. On the satellite chassis, locate the memory board slots. 2. Hold the 4 GB memory board by its corners, with the DIMM slots facing up. 19