HP LaserJet 5200 HP LaserJet 5200L Series Printer - User Guide - Page 118
Load Tray X <type> <size>, 5 Unexpected Type In Tray X
View all HP LaserJet 5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Control panel message 40 BAD SERIAL TRANSMISSION alternates with To continue press 41.3 UNEXPECTED SIZE IN TRAY X alternates with LOAD TRAY X 41.5 UNEXPECTED TYPE IN TRAY X alternates with LOAD TRAY X 41.X ERROR alternates with To continue press 49.XXXXX ERROR alternates with To continue turn off then on 50.X FUSER ERROR For help press 51.XY ERROR alternates with To continue turn off then on Description Recommended action A serial data error (parity, framing, or line 1. Press to continue printing. overrun) has occurred while the printer was receiving data. NOTE: Data will be lost. 2. If the message persists, contact HP Support. Media is loaded that is longer or shorter in the 1. feed direction than the size configured for the tray. 2. Press to print from a different tray. To print from the current tray, load the tray with the size and type indicated. Ensure that all trays are configured correctly before printing again. See Configuring trays on page 53 for more information. The printer senses a different media type than what is configured in the tray. 1. Press to print from a different tray. 2. To print from the current tray, load the tray with the size and type indicated. Ensure that all trays are configured correctly before printing again. See Configuring trays on page 53 for more information. A printer error has occurred. 1. Press to continue or press for more information. 2. If the message persists after exiting help, turn the printer off and then on. 3. If the message persists, contact HP Support. A critical firmware error has occurred. 1. Turn the printer off and then on. 2. If the message persists, contact HP Support. A fuser error has occurred. A printer error has occurred. 1. Turn the printer off. 2. Verify the fuser is installed correctly and fully seated. 3. Turn on the printer. 4. If the message persists, contact HP Support. 1. Press to continue. 2. If the message persists, turn the printer off and then on. 3. If the message persists, contact HP Support. 106 Chapter 7 Problem solving ENWW