HP LaserJet Enterprise 500 Maintenance Manual - Page 304

Appendix F Form Design Checklist Form Design Checklist Use this checklist to help you remember key areas of consideration when designing and ordering forms and paper stocks. Environment ________ Before they are used, forms are given at least 24 hours of condensing time in the environment in which they will be used. ________ Forms are not stored in environments that result in such damage as delamination of glue lines, creasing, folding, etc. Type of Form 1 Part Form Type (Check One) 2 Part 3 Part 4 Part 5 Part 6 Part Carbon Range Recycled Paper? Yes _______ No _______ If yes, assure adequate form strength to prevent tractor holes and perforations from tearing or detaching during form feeds and page ejects. Security Form? Yes _______ No _______ If yes, the last page of the form should have a minimum 50% reflectance, and, if possible, the stipled page faces inward to the form. Form Weight Form weight Minimum = 15 lb. / 6.8 kg ; Maximum = 100 lb / 45.36 kg) Form Thickness Form thickness 0.025 inches / 0.0635 cm maximum measured at the thickest point of the form, which includes perforations, compressed staples, glue lines, etc.) Form Evenness The evenness of the form Not to exceed 0.003 in. / 0.0635 cm) Tenting due to buildup of perforation thickness must be minimized. A perforation thickness measured at the major perforation that exceeds 1.25 times the forms thickness measured in the print area will result in an 304