HP LaserJet Enterprise flow MFP M830 User Guide 1 - Page 71
Step six: Con the default staple location, Select a staple location from the list of options
View all HP LaserJet Enterprise flow MFP M830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Hole punch location Two left Two right Two top Two bottom Three left Three top Three right Three top Three left or top Four left Four right Four top Four left or top 2/3 Hole Puncher 2/4 Hole Puncher NOTE: Not all options are available. Available options depend on whether the hole punch accessory is a 2/3 or 2/4 hole puncher. NOTE: To use the hole puncher, load Letter or A4-size paper with the long edge of the paper along the right edge of the tray (long-edge feed). Step six: Configure the default staple location 1. From the Home screen on the product control panel, scroll to and touch the Administration button. 2. Open the following menus: ● Stapler/Stacker Settings ● Stapling 3. Select a staple location from the list of options, and then touch the Save button. The following staple options are available: ● None ● Top left ● Top right ● Two left ● Two right ● Two top ● Two top or left ENWW Install or replace a stapler/stacker or stapler/stacker with hole punch accessory for the HP Color LaserJet 63 Enterprise M855 and HP Color LaserJet Enterprise flow MFP M880