HP LaserJet Enterprise flow MFP M830 User Guide 1 - Page 75
binder cover from the packaging., If installing an optional booklet maker
View all HP LaserJet Enterprise flow MFP M830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
2. Open the front door of the accessory, and then remove all of the shipping tape and packing materials from inside the accessory. Close the front door. CAUTION: Make sure that you remove all of the shipping material from inside the accessory. 3. Remove all the shipping tape and packing materials from the output trays (callout 1) and the booklet output tray (callout 2). 4. If installing an optional booklet maker, remove the intermediate paper transport unit (IPTU) and the binder cover from the packaging. NOTE: If you are replacing an existing booklet maker, these parts are already installed on the product and replacement of them is not required. ENWW Install or replace the booklet maker or booklet maker hole punch accessory for the HP Color LaserJet 67 Enterprise M855 and HP Color LaserJet Enterprise flow MFP M880