HP LaserJet Enterprise flow MFP M830 User Guide 1 - Page 82
Con the product for Mailbox Mode or Stacker Mode
View all HP LaserJet Enterprise flow MFP M830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Configure the product for Mailbox Mode or Stacker Mode ● Step one: Access the HP Embedded Web Server (EWS) ● Step two: Configure Mailbox Mode or Stacker Mode from the Embedded Web Server (EWS) ● Step three: Configure the Stapler/Stacker settings ● Step four: Configure the Staple/Collate settings ● Step five: Configure the Hole Punch functionality ● Step six: Configure the Output Bin The mailbox mode allows each bin to be addressed individually. The stacker mode stacks the printed output from the lowest bin to the top. Use the Embedded Web Server (EWS) to configure the mode. Check the driver to make sure it is configured for the new mode. Step one: Access the HP Embedded Web Server (EWS) 1. From the Home screen on the product control panel, touch the Network address or host name. button to display the IP 74 Chapter 2 Install and configure the finishing accessories ENWW