HP LaserJet Managed MFP E82540-E82560 Engine Install Guide - Page 5

Load paper in Tray 2., Initialize the printer.

Get HP LaserJet Managed MFP E82540-E82560 PDF manuals and user guides View all HP LaserJet Managed MFP E82540-E82560 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

8 Load paper in Tray 2. NOTE: Paper is used to print configuration sheets as needed (Letter or A4). 8.1 8.2 Push down on the blue tab in the back of the tray. At the same time, pinch or squeeze the blue tab in the front of the tray and slide to adjust to the proper paper length. Both tabs are springloaded and will lock, once released. 8.3 Squeeze the sides of the tab, and then slide to adjust the paper width. 8.4 Load the paper. NOTE: A4 or Letter paper should be loaded with the long edge of the paper on the right side of the tray, as shown. 9 Initialize the printer. CAUTION: Do not connect the network cable at this time.   9.1 Connect the power cord to the printer and the wall receptacle (callout 1). IMPORTANT: Use the printer power switch to turn the printer power on (callout 2). 9.2 9.4 Print a configuration page to make sure that the printer is properly working. NOTE: Mark the printed page with a "1" to represent the first initialization. 5 9.3 Follow the control panel prompts to set the country/region, language, date, and time settings. NOTE: Wait 5-10 minutes for the printer to automatically complete the initialization processes.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
²
±
5
8.1
8.4
9.1
9.2
8.2
8.3
9
8
9.3
9.4
Load paper in Tray 2.
NOTE:
Paper is used to print configuration sheets as needed (Letter or A4).
Push down on the blue tab in the back of the
tray. At the same time, pinch or squeeze the blue
tab in the front of the tray and slide to adjust to
the proper paper length. Both tabs are spring-
loaded and will lock, once released.
Squeeze the sides of the tab, and then slide
to adjust the paper width.
Load the paper.
NOTE:
A4 or Letter paper should be loaded with the
long edge of the paper on the right side of the tray,
as shown.
Initialize the printer.
CAUTION:
Do not connect the network cable at this time.
Connect the power cord to the printer and the wall
receptacle (callout 1).
IMPORTANT:
Use the printer power switch to turn
the printer power on (callout 2).
Follow the control panel prompts to set the
country/region, language, date, and time settings.
NOTE:
Wait 5-10 minutes for the printer to
automatically complete the initialization processes.
Print a configuration page to make sure that the
printer is properly working.
NOTE:
Mark the printed page with a “1” to represent
the first initialization.