HP LaserJet Pro M11-M13 User Guide - Page 44
Con IP network settings, Introduction, Printer sharing disclaimer
View all HP LaserJet Pro M11-M13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Configure IP network settings ● Introduction ● Printer sharing disclaimer ● View or change network settings ● Manually configure IPv4 TCP/IP parameters Introduction Use the following sections to configure the printer network settings. Printer sharing disclaimer HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems and not of the HP printer drivers. Go to Microsoft at www.microsoft.com. View or change network settings Use the HP Embedded Web Server to view or change IP configuration settings. 1. Open the HP Embedded Web Server (EWS): a. Print a configuration page to determine the IP address or host name. i. Press and hold the Cancel button until the Ready light begins blinking. ii. Release the Cancel button. b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer configuration page. Press the Enter key on the computer keyboard. The EWS opens. NOTE: If the web browser displays a message indicating that accessing the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer. 2. Click the Networking tab to obtain network information. Change settings as needed. Manually configure IPv4 TCP/IP parameters Use the EWS to manually set an IPv4 address, subnet mask, and default gateway. 1. Open the HP Embedded Web Server (EWS): a. Print a configuration page to determine the IP address or host name. i. Press and hold the Cancel button until the Ready light begins blinking. ii. Release the Cancel button. 36 Chapter 5 Manage the printer ENWW