HP Latex 3100 Site Preparation Guide - Page 19

HP Latex 3000 Printer Series HP Latex 3000 Printer weight with crate 2000 kg (4409 lb) Printer weight without substrate 1500 kg (3307 lb) Load on each foot 750 kg (1653 lb) HP Latex 3100/3200 2240 kg (4938 lb) 1740 kg (3836 lb) 870 kg (1918 lb) HP Latex 3500/3600 2730 kg (6019 lb) 1870 kg (4123 lb) 935 kg (2061 lb) HP Latex 3800 Jumbo Roll Solution Jumbo input or output Jumbo input and HP Latex 3800 printer unit output units Weight 3000 kg (6614 lb) with crate 3300 kg (7275 lb) 6600 kg (14551 lb) Weight without substrate 1900 kg (4189 lb) 2100 kg (4630 lb) 4200 kg (9259 lb) Load on 935 kg (2061 lb) each foot 250 kg (551 lb) 250 kg (551 lb) HP Latex 3800 with jumbo input unit 6300 kg (13889 lb) 4000 kg (8818 lb) HP Latex 3800 with jumbo input and output units 9600 kg (21164 lb) 6100 kg (13448 lb) Your printer has four wheels used to move the printer and three feet that must be lowered to touch the ground and support the printer. The following diagram shows where the feet and wheels touch the ground, in case you need extra reinforcements. If your printer is an HP Latex 3500/3600 you also have 4 extra feet that also have to be leveled. These are safety secondary feet and not structural. See installation guide for more information. In the table below, the number or letter in the left column corresponds to the diagram above. 1 Wheels 2 Feet A 6 m (236 in) B 3.65 m (144 in) C 1.72 m (67.7 in) D 0.76 m (30 in) ENWW Room and spacial requirements 15