HP Latex 3100 Site Preparation Guide - Page 28

Shipment items All printer components will arrive in a single crate. The dimensions and weight of the crate and printer are as follows: HP Latex 3000 - Printer and crate physical specifications Width Depth Height Weight Crate (printer inside) Printer 5.86 m (231 in) 5.98 m (235.4 in) 1.93 m (76.0 in) 1.72 m (68 in) 2.16 m (85.0 in) 1.67 m (66 in) 2000 kg (4409 lb) 1500 kg (3307 lb) NOTE: The printer width as shown above is after installation. As stored in the crate, it is less wide. HP Latex 3100/3200/3500/3600 - Printer and crate physical specifications Width Depth Height Crate (printer inside) 5.86 m (231 in) 1.93 m (76 in) 2.16 m (85 in) Printer 5.98 m (235 in) 1.72 m (68 in) 1.87 m (74 in) Weight 2500 kg (5512 lb)/2630 kg (5798 lb) 1740 kg (3836 lb)1870 kg (4123 lb) HP Latex 3800 Jumbo Roll Solution - Printer and crate physical specifications Width Depth Height Crate (printer inside) 5.86 m (231 in) 1.93 m (76 in) 2.16 m (85 in) Printer 5.98 m (235 in) 1.72 m (68 in) 2.16 m (85 in) Crate (Jumbo input or output unit inside - per unit) 5.33 m (210 in) 2.27 m (89 in) 2.5 m (98 in) Jumbo Input/Output units (per unit) 4.9 m (193 in) 4.6 m (181 in) 1.62 m (64 in) Weight 2630 kg (5798 lb) 1870 kg (4123 lb) 3300 kg (7275 lb) 2100 kg (4630 lb) NOTE: Each jumbo roll spindle comes in a separate crate. Tools and manpower required for installation The installation process requires two capable persons, usually the installer and the operator. Additionally a certified electrician is needed to configure the electrical system. Usually a certified forklift driver is required. 12mm Ø drill bits for the HP Latex 3500/3600, and 12 mm and 16 mm Ø drill bits for the HP Latex 3800 are required to drill concrete during installation. Check with the installation specialist before delivery to make sure you do not have to supply any tools. 24 Chapter 3 Shipment arrival preparation ENWW