HP Latex 3600 Users Guide - Page 355
Ink collector: after uninstalling the ink collector kit maintenance, Introduction, Wipe the protector
View all HP Latex 3600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 355 highlights
Ink collector: after uninstalling the ink collector kit maintenance Before any cleaning maintenance, ensure that you have turned the printer off, and be careful to follow the appropriate safety precautions. Risk of burns Crush hazard Risk of trapped fingers Hazardous moving part For more safety information, see Safety precautions on page 2 Electric shock hazard Introduction The following maintenance procedures are required after uninstalling the ink collector kit: ● Clean the aerosol filters on page 206 ● Wipe the protector on page 349 ● Wipe the ink collector modules on page 349 ● Clean the curing module and airlet plates on page 350 ● Clean the print zone on page 202 ● Clean the substrate-advance sensor on page 204 Wipe the protector While you have the protector out of the printer, wipe all surfaces and check the ribs. Wipe the ink collector modules While you have the ink collector modules out of the printer, wipe all dirty surfaces. If necessary, replace the foams: see Replace the ink collector foams on page 353. CAUTION: Proper maintenance and genuine HP consumables are required to ensure that the printer operates safely as designed. The use of non-HP consumables (foams, filters, printhead cleaner roll, or inks) may present a risk of fire. ENWW Ink collector: after uninstalling the ink collector kit maintenance 349