HP Latex 3600 Users Guide - Page 361
Ink collector 500 liter maintenance, Introduction, Clean the curing fan grid and internal foam
View all HP Latex 3600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 361 highlights
Ink collector 500 liter maintenance Before any cleaning maintenance, ensure that you have turned the printer off, and be careful to follow the appropriate safety precautions. Risk of burns Crush hazard Risk of trapped fingers Hazardous moving part For more safety information, see Safety precautions on page 2 Electric shock hazard Introduction The following maintenance procedures are required every 500 liters: ● Clean the curing fan grid and internal foam on page 355 ● Clean the curing module and airlet plates on page 350 ● Replace a curing fan and resistor module on page 315 ● Replace protector and textile substrate edge holder on page 358 Clean the curing fan grid and internal foam Risk of burns Crush hazard Risk of trapped fingers Hazardous moving part Light radiation hazard For more safety information, see Safety precautions on page 2 Electric shock hazard Moving fan blades Prepare to replace the curing fan grid and internal foam 1. Ensure that you have the Curing Heater and Fan Module Kit (CZ056-67054), which is included in the HP Latex 3000 Series Standard Uptime Kit (D4J02A). 2. Ensure that the printer is not printing. 3. Turn off the printer in the correct way for maintenance operations: see Turn the printer off on page 195. 4. Wait for the curing modules to cool down. Clean the curing fan grid 1. Open the window. ENWW Ink collector 500 liter maintenance 355