HP Latex 375 User Guide Latex 3x5 - Page 53

Load a roll onto the spindle

Get HP Latex 375 PDF manuals and user guides View all HP Latex 375 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

3. Stick it to the platen as shown. 4. Load the substrate that you want to check. 5. Open your RIP software. 6. Download the test file from inside the printer: http://printerIP/hp/device/webAccess/images/ Ink_trespassing_check.pdf, where printerIP is the IP address of your printer. 7. Print the test file using the number of passes and substrate preset that you intend to use in future with this substrate (or a similar profile in terms of ink limit). 8. Unload the substrate. 9. Remove the strip of self-adhesive vinyl from the platen. 10. Look at the self-adhesive vinyl you have taken from the platen. ● If the strip is completely white (has no ink on it), the tested substrate is non-porous and can be used for printing as described in this guide. ● If there some ink on the strip, the tested substrate is porous and should not be used with the 315 or 335 printers. It may be used with the 365 or 375 printer and the ink collector. 11. Clean the platen: see Clean the platen on page 154. Load a roll onto the spindle TIP: As an alternative to the description here, you can see an animation of this procedure in the front panel: press , then Substrate > Substrate load > Learn how to load spindle. 1. Make sure that the printer wheels are locked (the brake lever is pressed down) to prevent the printer from moving. ENWW Load a roll onto the spindle 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
3.
Stick it to the platen as shown.
4.
Load the substrate that you want to check.
5.
Open your RIP software.
6.
Download the test file from inside the printer:
http://
printerIP
/hp/device/webAccess/images/
Ink_trespassing_check.pdf
, where
printerIP
is the IP address of your printer.
7.
Print the test file using the number of passes and substrate preset that you intend to use in future with this
substrate (or a similar profile in terms of ink limit).
8.
Unload the substrate.
9.
Remove the strip of self-adhesive vinyl from the platen.
10.
Look at the self-adhesive vinyl you have taken from the platen.
●
If the strip is completely white (has no ink on it), the tested substrate is non-porous and can be used
for printing as described in this guide.
●
If there some ink on the strip, the tested substrate is porous and should not be used with the 315 or
335 printers. It may be used with the 365 or 375 printer and the ink collector.
11.
Clean the platen: see
Clean the platen
on page
154
.
Load a roll onto the spindle
TIP:
As an alternative to the description here, you can see an animation of this procedure in the front panel:
press
, then
Substrate
>
Substrate load
>
Learn how to load spindle
.
1.
Make sure that the printer wheels are locked (the brake lever is pressed down) to prevent the printer from
moving.
ENWW
Load a roll onto the spindle
47