HP Latex 850 Users Guide - Page 14
Introduction, Label, Explanation
View all HP Latex 850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Introduction Label 10 Chapter 1 Introduction Explanation Electric shock hazard. The printer has two mains supplies. There are no operator-serviceable parts inside the printer. In case of operation of the fuse, parts of the printer that remain energized may represent a hazard during servicing. Refer servicing to qualified service personnel. Turn off the printer using both Branch Circuit Breakers located in the building's Power Distribution Unit (PDU) before servicing. See installation instructions before connecting to the supply. Danger of electric shock. In case of operation of the fuse, parts of the printer that remain energized may represent a hazard during servicing. Therefore, ensure that the printer is completely turned off before servicing. Risk of burns. Do not touch the internal enclosures of the printer's drying and curing modules. You are recommended to wear gloves when handling ink cartridges, printhead cleaning cartridges and the printhead cleaning container. When substrate has been loaded, the carriage descends into its normal position, and could crush your hand or anything else left underneath it. Danger that your hands may become trapped between gearwheels When the printer is printing, the printhead carriage travels back and forth across the substrate. Beware of this moving part. ENWW