HP Latex 850 Users Guide - Page 56
WARNING, Be aware that raising the printhead from the substrate may give poorer print quality.
![]() |
View all HP Latex 850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Handle the substrate Rear Front 15. When the substrate edge is correctly positioned and the substrate is evenly tensioned, lower the tension roller lever. 16. Go to the front panel and select Carriage beam position > Move to printing (normal) to lower the carriage beam into its normal position, close to the substrate. This process takes about 2 minutes to complete. NOTE: The Move to printing (custom) position allows you to set the printhead-to-substrate distance for thick substrates or substrates that may wrinkle in the print zone, to avoid ink smearing. Be aware that raising the printhead from the substrate may give poorer print quality. WARNING! Do not insert your hands or anything else into the printer while the carriage beam is descending. 17. Lower the substrate pressure handles at the rear of the printer. If you forget to do this, an alert will remind you. 52 Chapter 3 Handle the substrate ENWW
![](/manual_guide/products/hewlettpackard-latex-850-users-guide-d575864/56.png)