HP M407 HP Photosmart M407 digital camera with HP Instant Share - User's Manua - Page 88
Resetting the Camera
UPC - 829160450179
View all HP M407 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Resetting the Camera If your camera does not respond when you press any buttons, try resetting the camera as follows: 1 Turn off the camera. 2 If you have an optional memory card installed, remove it. (Although removing an optional memory card is not necessary for performing the reset, it eliminates the memory card as a possible cause of the problem.) 3 Reset the camera by removing power from it as follows: • If you are powering the camera with only batteries, open the Battery/Memory card door and remove both batteries for approximately 5 seconds. • If you are using only an optional HP AC power adapter to power the camera, disconnect it from the camera for at least 5 seconds. • If you are using both batteries and the HP AC power adapter, remove both for at least 5 seconds. 4 Reinsert the batteries and close the Battery/Memory card door, and/or reconnect the HP AC power adapter to the camera. 5 After verifying that the camera works without an optional memory card, reinsert the card if you have one. 88 HP Photosmart M407 User's Manual