HP ML310 HP Factory-Installed Operating System Software for Microsoft Windows - Page 9

Installation Completing the operating system installation IMPORTANT: Before powering up the server and configuring the operating system software, connect the server hardware as described in the server user guide. Do not install additional hardware devices until after the software installation is complete. IMPORTANT: If the system prompts you for an installation path for files to be copied during the installation of additional hardware or software components, enter the path C:\Windows SBS 2003 R2\I386 for the original files. If the system prompts you for HP driver files, enter the path C:\HPDRVRS. Driver files are located in subdirectories in this path. To view the directory, click Browse. IMPORTANT: To successfully complete the software installation, TCP/IP services must be installed and the server must be connected to an active network connection. 1. Power up the server. 2. At the HP Welcome screen, press the appropriate key to continue. The server software license screen appears. 3. Read all software license agreements provided with the server, and press the appropriate key to accept the HP license agreement. 4. Select the Typical or Custom disk space option. The Typical option sets the partition size to 8 GB, and the Custom option enables you to set the partition size from at least 8 GB to the maximum disk capacity. 5. Follow the online prompts. Several status screens appear during the software installation, describing the process. For step-by-step installation procedures and helpful tips for setting up the server, see the Completing Setup for Microsoft Windows Small Business Server 2003 R2 guide. CAUTION: The server requires a reboot at the end of the installation. Do not power down the server at any time during the installation process. Any power interruption during the installation process could prevent proper completion of the installation and prevent the operating system from restarting. NOTE: You can view and print the EULA after the installation is completed by clicking Start and selecting All Programs>Pre-Install Features>EULA. Signed drivers During the installation of the operating system, caution messages concerning unsigned software drivers might appear. The caution message states, "Digital signature is not found," when drivers are about to be Installation 9