HP ML530 Implementing Microsoft Windows 2000 with Service Pack 4 on ProLiant s - Page 17

To use Microsoft Windows 2000 Server, configuration must meet the requirements described in Table 7. Table 7. Microsoft Windows 2000 Server configuration requirements Feature Minimum configuration Recommended configuration Processor (support for up to 4 processors) 133-MHz Pentium compatible Pentium II or better 233 MHz or greater RAM 128 MB 256 MB to 4 GB Monitor VGA SVGA Disk space 2 GB with minimum of 1 GB available 4 GB available space To use Microsoft Windows 2000 Advanced Server, configuration must meet the requirements described in Table 8. Table 8. Microsoft Windows 2000 Advanced Server configuration requirements Feature Minimum configuration Recommended configuration Processor (support for up to 8 processors) 133-MHz Pentium compatible Pentium II or better 233 MHz or greater RAM 128 MB 256 MB to 8 GB Monitor VGA VGA Disk space 2 GB with minimum of 1 GB available 4 GB available space NOTE: Available disk space refers to free disk space on the partition to contain the system files. Additional space is required to copy the Windows 2000 CD contents to the hard disk during installation and for a network installation Cluster configurations The following cluster solutions are supported for use with Windows 2000 Advanced Server Service Pack 4: • HP ProLiant DL380 G3 Packaged Cluster • HP ProLiant DL380 G2 Packaged Cluster • HP ProLiant Cluster HA/F100 & HA/F200 for MSA1000 • HP ProLiant Cluster HA/F500 for EVA5000 & EVA3000 • HP ProLiant Cluster HA/F500 for MA8000/EMA12000/EMA16000 • HP ProLiant Cluster HA/F100 & HA/F200 for RA4100 • HP ProLiant CL380 Packaged Cluster • HP ProLiant CL1850 Packaged Cluster Before installing the HP ProLiant Cluster solution, it is very important to refer to the HP Cluster Configuration Support website for details on components that make up a valid cluster configuration. 17