HP MP3800 Compaq IPAQ Microportable Projector MP3800 - Users Manual - Page 15
Connecting the Projector to a Compaq iPAQ Pocket PC, Worldwide Telephone Numbers
View all HP MP3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Using the Projector Connecting the Projector to a Compaq iPAQ Pocket PC To connect the projector to a Compaq iPAQ Pocket PC, the Pocket PC must have a male connector adapter and a VGA-out PC Card with a 15-pin connector. The VGA-out PC Card with the 15-pin connector is not included with the Compaq iPAQ Pocket PC. For information on purchasing the optional VGA-out PC Card, contact your Compaq authorized dealer or reseller. To locate a reseller near you, refer to the Worldwide Telephone Numbers booklet that came with your projector or, to purchase directly from Compaq, refer to the Compaq website at http://www.compaq.com/products/iPAQ. 1. Connect one end of the signal cable 1 into the back of the projector and connect the other end to the VGA-out PC Card. The VGA-out PC Card may be inserted into the PC slot on the Compaq Pocket PC before or after connecting the signal cable. ✎ Be sure the signal cable aligns with the connector. Do not force the cable onto the connector or you may damage the signal cable or the projector. 2. Connect one end of the power cord 2 into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector. Compaq iPAQ Microportable Projector MP3800 User's Guide 2-5