HP MP3800 Compaq IPAQ Microportable Projector MP3800 - Users Manual - Page 16
Powering On the Projector
View all HP MP3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Using the Projector Powering On the Projector 1. Make sure the power cord and signal cable are securely connected. 2. Make sure the projector is perpendicular to the projection screen. ✎ If the projector cannot be placed perpendicular to the screen, use the Image Control adjustment in the OSD menu to adjust horizontal keystoning. Refer to Chapter 3, "Using the On-Screen Display Menu," for more information 3. Remove the lens cap 1 from the projector by pressing in on the tabs on either side of the lens cap and pulling it straight out. 4. Press the Power/Standby button 2 on the top of the projector. When the projector has warmed up, the Compaq startup screen displays and the LED on the Power/Standby button turns green. 2-6 Compaq iPAQ Microportable Projector MP3800 User's Guide