HP MP3800 Compaq IPAQ Microportable Projector MP3800 - Users Manual - Page 51

Replacing the Projector Lamp Module

Get HP MP3800 - Compaq iPAQ XGA DLP Projector PDF manuals and user guides View all HP MP3800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Care and Maintenance Replacing the Projector Lamp Module Å WARNING: When the lamp reaches its end of life, it may pop or rupture. To reduce the risk of personal injury, be careful when removing the lamp cover as broken glass may be present. Never open the lamp cover while the projector is operating or when the lamp is hot. The projector will alert you when the lamp approaches its failure mode or end of life. When the message "Lamp May Fail Soon. Replacement Suggested" displays on the projection screen, you should change the lamp as soon as possible. Contact your local Compaq authorized dealer, seller, or reseller to purchase a spare lamp or have the lamp changed. To locate a reseller near you, refer to the Worldwide Telephone Numbers booklet that came with your projector. You can also purchase a lamp directly through http://www.compaq.com/products/projectors. Follow these steps to replace the projector lamp module: 1. Turn off the projector by pressing the Power/Standby button on the top of the projector. 2. Allow the projector to cool down for at least 30 minutes. Å WARNING: The lamp assembly operates at a very high temperature. To reduce the risk of personal injury, allow the projector to cool down for at least 30 minutes before opening the lamp cover. Never open the lamp cover while the projector is operating or when the lamp is hot. Compaq iPAQ Microportable Projector MP3800 User's Guide 7-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
Care and Maintenance
Compaq iPAQ Microportable Projector MP3800 User’s Guide
7–3
Replacing the Projector Lamp Module
Å
WARNING:
When the lamp reaches its end of life, it may pop or
rupture. To reduce the risk of personal injury, be careful when removing
the lamp cover as broken glass may be present. Never open the lamp
cover while the projector is operating or when the lamp is hot.
The projector will alert you when the lamp approaches its failure
mode or end of life. When the message “Lamp May Fail Soon.
Replacement Suggested” displays on the projection screen, you
should change the lamp as soon as possible. Contact your local
Compaq authorized dealer, seller, or reseller to purchase a spare
lamp or have the lamp changed. To locate a reseller near you,
refer to the
Worldwide Telephone Numbers
booklet that came
with your projector. You can also purchase a lamp directly
through
Follow these steps to replace the projector lamp module:
1.
Turn off the projector by pressing the
Power/Standby
button on
the top of the projector.
2. Allow the projector to cool down for at least 30 minutes.
Å
WARNING:
The lamp assembly operates at a very high temperature. To
reduce the risk of personal injury, allow the projector to cool down for at
least 30 minutes before opening the lamp cover. Never open the lamp
cover while the projector is operating or when the lamp is hot.