HP MP3800 Compaq IPAQ Microportable Projector MP3800 - Users Manual - Page 58
Power/Standby, Troubleshooting, Compaq iPAQ Microportable Projector MP3800 User's Guide - led projector lamps
View all HP MP3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Troubleshooting Troubleshooting (Continued) Problem Only the Compaq startup screen displays. A blue screen displays on the projection screen when a videocassette recorder, DVD player, or other video source is connected to the projector. Screen is dimmer than normal. Lamp shuts off. Solutions 1. Check that the cables are connected securely. 2. Verify that the proper input source is connected. 3. Make sure your notebook computer's external video port is activated. 1. Check the Play or TV/Video buttons on the video source. 2. If that does not work, refer to the owner's manual that came with the video source. The projector is in lamp saver mode. Press the lamp saver button on the top of the projector to turn lamp saver on or off. If the LED is green, lamp saver is on. If the LED is not lit, lamp saver is off. 1. If the Standby LED flashes green rapidly, the projector has overheated and will automatically shut down. Wait five to ten minutes until the LED stops flashing and the Power/Standby button turns amber before restarting the projector again. 2. A minor power surge may cause the lamp to shut off. Wait a few minutes, then turn it back on. 3. When the lamp has reached the end of its life, the system will automatically turn off to prevent possible lamp rupture. Replace the lamp as described in the "Replacing the Projector Lamp Module" section of Chapter 7. Compaq iPAQ Microportable Projector MP3800 User's Guide 8-5