HP Media Center m1200 Upgrading and Servicing Guide - Page 7
Replacing the Side Panel, Removing the Front Panel, Replacing the Front Panel
View all HP Media Center m1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
SERIAL R ETHERNET S-VID IN L TV-OUT VID IN LCD TV Replacing the Side Panel IN OUT 1 Slide the side panel forward on the frame until it locks into place. 2 Align the thumbscrews on the side panel with the holes on the back of the chassis frame, and then tighten the thumbscrews on the side panel. 3 See "After Closing the PC" on page 2. Removing the Front Panel This procedure is necessary only when removing or replacing an optical drive, a memory card reader, or a hard disk drive. 1 Locate the three small tabs attached to the front panel on the side of the chassis. 2 Press each tab away from the center of the chassis. Press the top, the middle, and the bottom tab, and then gently remove the front panel. Replacing the Front Panel 1 Place the chassis upright, and then align the bottom of the front panel with the ridge on the bottom of the chassis. 2 Guide the three small tabs on each side of the front panel into the correct holes until the panel snaps into place. Upgrading and Servicing Guide 3