HP Microportable Projector MP1600 Compaq MP1600 Microportable Projector User's - Page 10
Connecting to a Portable Computer, Microportable Projector and the Armada Graphics/Video - compaq microportable projector
View all HP Microportable Projector MP1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connecting the Projector to a Portable Computer 1. Connect one end of the projector signal cable to the projector and the other end to the VGA connector 1B or the DFP connector 1A on the portable computer and tighten the screws. Use the VGA cable OR the DFP cable; do not connect both cables. Be sure the signal cable aligns with the connector. Do not force the cable onto the connector or you may damage the signal cable or the projector. 2. Connect one end of the power cord 2 into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector. For more information on setting up the projector with a portable computer, see the white paper "Compaq MP1600 Microportable Projector and the Armada Graphics/Video Capabilities" included on the CD-ROM. 1-4 MP1600 Microportable Projector