HP Microportable Projector MP1600 Compaq MP1600 Microportable Projector User's - Page 34
Replacing the Projector Lamp Module, mode or end of life. When the message Lamp May Fail Soon
View all HP Microportable Projector MP1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Replacing the Projector Lamp Module When the projector lamp reaches its end of life, it may pop when it burns out. The lamp will need to be replaced before the projector can be used again. ! WARNING: When the lamp reaches its end of life, it may pop or rupture. To reduce the risk of personal injury, be careful when removing the lamp cover as broken glass may be present. Never open the lamp cover while the projector is operating or when the lamp is hot. The projector will alert you when the lamp approaches its failure mode or end of life. When the message "Lamp May Fail Soon Replacement Suggested" displays on the projection screen, you should change the lamp as soon as possible. Contact your local Compaq authorized dealer, seller, or reseller to purchase a spare lamp or have the lamp changed. 1-28 MP1600 Microportable Projector