HP Mini 110-4100ca HP Mini 210, HP Mini 110, Compaq Mini CQ10 - Maintenance an - Page 87
Heat sink, Top cover see
View all HP Mini 110-4100ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Heat sink Description Heat sink (includes replacement thermal material) Spare part number 651898-001 Before removing the heat sink, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 50), and then remove the following components: ● Service cover (see WLAN module on page 52) ● Keyboard (see Keyboard on page 61) ● Top cover (see Top cover on page 67) ● System board (see System board on page 74) ● Fan (see Fan on page 77) Remove the heat sink: 1. Remove the two Phillips PM2.0×4.6 screws (1) that secure the heat sink to the system board. Component replacement procedures 79