HP Mopier 320 Service Manual - Page 101

Paper Handling Menu When paper handling settings are correctly configured through the control panel, you can print by choosing the type and size of paper from the printer driver or software application. Some items in this menu (such as duplex and manual feed) can be accessed from a software application, or from the printer driver (if the appropriate driver is installed). Printer driver and software application settings override control panel settings. Table 3-7. Paper Handling Menu Item * * Values For supported paper types, see table 1-2. For supported paper types, see table 1-2. For supported paper types, see table 1-2. For supported paper types, see table 1-2. Explanation Determine how the printer will use Tray 1. If paper is loaded in Tray 1, the printer will pull paper from that tray first. A paper size must be assigned to Tray 1 using the option (the next item in this menu when ). This allows Tray 1 to be used as a reserved tray. Set the value to correspond with the paper type currently loaded in Tray 2. Set the value to correspond with the paper type currently loaded in Tray 3. Set the value to correspond with the paper type currently loaded in the Optional 2000-sheet Input Tray (Tray 4) or Tray 4 of the Optional 2 x 500-sheet Input Tray (Trays 4 and 5). Set the value to correspond with the paper type currently loaded in Tray 5 of the Optional 2 x 500-sheet Input Tray (Trays 4 and 5). This item appears when an output device is installed. Set the value to correspond to the appropriate bin. Additional output bins appear in the menu with the installation of output devices. Feed the paper manually from Tray 1, rather than automatically from a tray. When and Tray 1 is empty, the printer goes offline when it receives a print job and displays . 68 Chapter 3 Operating Overview C4229-90911