HP Mopier 320 Service Manual - Page 128

Table 3-16. Menu Tabs (continued) 2-sided/N-up tab This tab has four controls for setting up the options and a preview image that graphically illustrates the current settings. 2-sided Copying - Shows the currently selected 2-sided mode. Choose the two-sided mode you need. The preview image will update to display your choice. Flip Pages Up - This setting is active if the you choose to copy onto both sides of the output paper. By default, the pages of the two-sided binding are flipped to the left, like a book, when viewed from the backside of the job. When the setting is checked, the pages are bound, appearing flipped up when viewed from the backside of the job. The preview image will update to display your choice. N-up Copying - Shows the currently selected number of input pages to be printed on each output page. Choose the number of input pages needed to print on each output page. The preview image will update to display your choice. Print Page Borders - This setting is active when you select two or more pages for each sheet. When checked, page borders will print around each page image on the output page. The preview image will update to display your choice. output/staple tab You can configure the output and stapling options using the two main controls on this tab. Output Bin - Shows the currently selected output bin. Choose which bin the copy job will be delivered to. If the output bin is set to the stapling bin and a stapling option is selected, then changing the output bin to another location will turn off the stapling option. Stapling - Allows you to choose stapling options. The number of options displayed will depend on the stapling device installed. If you select an option to have the output stapled, then the Output Bin setting will change to display that stapling can only take place in the staple bin. C4229-90911 Using the HP Digital Copy 320 Front Panel 95