HP Mopier 320 Service Manual - Page 47

CAUTION Adhesive Labels Use the following guidelines when selecting labels: Tray 1 is required for printing adhesive labels. Print labels to the Face-up Bin only. This printer does not support use of labels with any exposed spaces. Do not attempt to print on label sheets after any of the labels have been removed from the sheet. Damage to the printer may result. Labels must be arranged on the carrier sheet so that there are no exposed spaces on the sheet. Using label stock with spaces between rows or columns of labels can often result in labels peeling off during printing, causing serious jamming and possible damage to the printer. The top sheet (printing surface) must be of copier quality and provide good toner adhesion. The carrier sheet (backing sheet) must be compatible with the temperature and pressure of the fusing process, and must be coated for easy release of the top sheet. The adhesive must be stable at the 392° F (200° C) temperature encountered for 0.1 second in the fusing process, and must not produce emissions that exceed exposure levels or threshold limits established by OSHA and other safety agencies. Adhesives must not come into direct contact with any part of the printer. A wide selection of suitable labels may be ordered through HewlettPackard. Available sizes are listed in the HP LaserJet Printer Family Paper Specification Guide. 14 Chapter 1 Product Information C4229-90911