HP Mopier 320 Service Manual - Page 601
PAPER JAM IN, OUTPUT DEVICE, FAILURE, found at Paper Path Sensor 1
View all HP Mopier 320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 601 highlights
Table 7-8. 7-bin Tabletop Mailbox Error Messages (continued) Control Panel Event Description Message Log Error Message Recommended Action or (continued) or 13.12 32 or 13.22 32 Page found at Paper Path Sensor 1 (PPS1) during power on sequence. 1. Open the Paper Path Cover and remove any jammed paper. 2. Make sure that the Paper Path Sensor 1 (PPS1) moves freely. 3. Perform a sensor test to make sure that the Paper Path Sensor 1(PPS1) is working properly. 4. Replace the sensors PCA. 5. If the problem persists, replace the 7-bin Tabletop Mailbox controller PCA. 13.12 35 or 13.22 35 Page found at Paper Path Sensor 2 (PPS2) during power on sequence. 1. Open the Paper Path Cover and remove any jammed paper. 2. Make sure that the Paper Path Sensor 2 (PPS2) moves freely. 3. Perform a sensor test to make sure that the Paper Path Sensor 2 (PPS2) is working properly. 4. Replace the sensors PCA. 5. If the problem persists, replace the 7-bin Tabletop Mailbox controller PCA. 13.12 37 or Page found at Face-up Delivery 13.22 37 Sensor (FUDS) during power on sequence. 1. Open the Top Cover and remove any jammed paper. 2. Make sure that the Face-up Delivery Sensor (FUDS) moves freely. 3. Perform a sensor test to make sure that the Entry Sensor (FUDS) is working properly. 4. If the problem persists, replace the 7-bin Tabletop Mailbox controller PCA. 5. Replace the sensors PCA. 66.12 16 or Solenoid Malfunction. 66.22.16 1. Check that the 2 parallel black bars that are connected to the Diverter Solenoids (S3 and S4) have free movement. 2. Check for proper installation of the C-link cables. 3. Replace the C-link cables. 4. Replace the 7-bin Tabletop Mailbox controller PCA. 568 Chapter 7 Troubleshooting C4229-90911