HP N6010 Setup and Support Guide - Page 8
still not on, the power supply might be defective. Contact HP Support - scanjet
UPC - 882780590472
View all HP N6010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Chapter 1 The power supply also has an AC cable that is connected to the power supply on one end and plugged into a power outlet or surge protector on the other end. 1. Plug the AC cable into the back of the power supply. 2. Plug the other end of the AC cable into a power outlet or a surge protector. 3. Check that the green LED on the power supply cable connector is on. - If the green LED is not on, ensure that power is available to the power outlet or surge protector that the AC cable is plugged into. - If power is available to the power outlet or surge protector but the green LED is still not on, the power supply might be defective. Contact HP Support for assistance. 4. If the green LED is on, plug the power supply into the back of the scanner. 5. Turn the scanner on. Facing the back of the scanner, press the Power switch on the back of the scanner to the left. 6 HP Scanjet N6010 Sheetfeed Document Scanner