HP Nc4010 Hardware Guide - Page 29
Enabling or Disabling Num Lock Mode as You Work, Software Guide, Documentation Library - boot from cd
View all HP Nc4010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Pointing Devices and Keyboard If the external keypad is connected, the internal keypad cannot be turned on. Enabling or Disabling Num Lock Mode as You Work To turn num lock mode on or off on an external keypad as you work, press the num lk key on the external keypad, not on the notebook. Enabling or Disabling Num Lock Mode at Startup To set the notebook to start up with a connected external keypad in num lock mode, set your preference in Computer Setup. For more information about using Computer Setup, refer to the "Computer Setup" chapter in the Software Guide on the Documentation Library CD. To set the notebook to start up with the external keypad enabled: 1. Turn on or restart the notebook. 2. Press F10 while the F10 = ROM Based Setup message is displayed in the lower left corner of the screen. ❏ To change the language, press F2. ❏ For navigation instructions, press F1. 3. Select Advanced > Device Options, and then press enter. 4. Select or clear the Num Lock State at Boot field: ❏ To start up an external keypad with num lock mode turned on, select the field. ❏ To start up an external keypad with num lock mode turned off, clear the field. 5. Press F10. 6. To save your preference and exit Computer Setup, select File > Save Changes and Exit, and then follow the instructions on the screen. Your preference is set as you exit Computer Setup and is in effect when the notebook restarts. 2-12 Hardware Guide