HP Nc4010 Hardware Guide - Page 92
Replace the keyboard and Quick Launch button bezel screws, Replace the Quick Launch button bezel.
View all HP Nc4010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Hardware Upgrades 10. Insert the new memory module: a. Align the keyed (notched) edge of the module with the keyed area in the expansion slot. b. Press the module 1 into the slot from a 45-degree angle until it is seated, then push the module 2 downward until the retention clips snap into place. Inserting the new memory module 11. Replace the keyboard. 12. Replace the Quick Launch button bezel. 13. Replace the keyboard and Quick Launch button bezel screws located on the bottom of the notebook. 14. Replace the battery packs. 15. Reconnect external AC power and external devices. 16. Restart the notebook. Hardware Guide 8-13
Hardware Upgrades
Hardware Guide
8–13
10. Insert the new memory module:
a.
Align the keyed (notched) edge of the module with the
keyed area in the expansion slot.
b.
Press the module
1
into the slot from a 45-degree angle
until it is seated, then push the module
2
downward until
the retention clips snap into place.
Inserting the new memory module
11. Replace the keyboard.
12. Replace the Quick Launch button bezel.
13. Replace the keyboard and Quick Launch button bezel screws
located on the bottom of the notebook.
14. Replace the battery packs.
15. Reconnect external AC power and external devices.
16. Restart the notebook.